This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.

OK202-25

OK202-25

The OK202-25 is a 1U 20x2 intelligent OLED display. Engineered to quickly and easily add a powerful HMI to any application. Multiple communication protocols such as Serial RS232, TTL, I2C, and USB communication modes allow the OK202-25 OLED to be connected to a wide variety of host controllers.


Our Intelligent Character OLED displays provides you with a cost-effective industrial HMI user interface solution for that great product/project you are developing. This OLED displays features optional on-board large and medium digits, bar graphs all with the convenience of a 25 key matrix keypad will allow fast development for any application.
OLED technology improves readability by offering a high contrast display with wide viewing angles and requires significantly less power to operate than VFD or even LCD units.


  • 20x2 1U Intelligent OLED
  • Available Interfaces: Serial RS232, TTL, I2C, and USB
  • Two available voltage options: 5V, and 9-15 (12V)
  • 25 key matrix keypad
  • 6 General Purpose Outputs
  • Software controlled contrast and brightness with configurable time-out setting up to 90 minutes
  • Built in Horizontal or Vertical bar graphs
  • Extended temperature available for extreme environments of -20C to 70C
  • High contrast display and wide viewing angles
  • Fast and easy development
  • Designed, supported and Made in CANADA
  • Long life cycle
  • Customer headers available, please contact us
  • Semi-custom designs available
  • Long life production
  • Backed by Matrix Orbital's decades of research and development
Module
Family/SeriesIntelligent Display
Module Width (mm)116
Module Height (mm)37
Screen
Display TypeCharacter OLED
Viewing Area Width (mm)85
Viewing Area Height (mm)18.6
Active Area Width (mm)77.3
Active Area Height (mm)11.85
Resolution Width (Pixels)100
Resolution Height (Pixels)16
Pixel Pitch Width (mm)0.65
Pixel Pitch Height (mm)0.7
Pixel Width (mm)0.6
Pixel Height (mm)0.65
Character Columns20
Character Rows2
Character Pitch Width (mm)3.9
Character Pitch Height (mm)6.25
Character Width (mm)3.2
Character Height (mm)5.55
FontMultilingual
Viewing DirectionAny
Viewing Angle160
HMI
TouchscreenNone
Keys25
Haptic FeedbackNone
Audio FeedbackNone
GPO's6
Advanced GPO'sNone
DOWOptional, 1
Integrated LED'sNone
Electrical
InterfaceRS232, TTL, I2C, USB
Command ProtocolMatrix Orbital
ControllerAtmega8535
Minimum Voltage (Vdc)5
Typical Voltage (Vdc)5, 9-15
Maximum Voltage (Vdc)15
HeaderStandard
Environmental
Min. Operating Temp. (°C)-20, -40
Max. Operating Temp. (°C)70, 80
Min. Storage Temp. (°C)-40
Max. Storage Temp. (°C)80

Downloads

 File NameRevisionSize 
 File NameRevisionSize 
Alphanumeric Software  uProject1.42MiB

Description

uProject is an advanced testing software for Matrix Orbital displays. It allows testing of nearly all the features and allows test scripting and many other advanced features.

uProject (micro Project) is a series of different tools that should allow the testing of nearly all the features of most of our displays. uProject also features

scripting abilities to speed up testing or changing of a specific feature, such as backlight brightness or contrast.

 

All LK/VK/PK, MOS, MX and LCD/VFD series.

Alphanumeric Software  Boot Logo40.03KiB

Description

Boot Logo is designed for modification of the startup screen for some alphanumeric displays with startup screens.

The user has the ability to use the normal text from the display\'s font table, and the 8 custom characters.

Compatible Displays:

LK/VK/PK162-12
LK/VK/PK202-25
LK/VK/PK202-24-USB
LK/VK204-24-USB

MOS-AL/AV/AP202
MOS-AL/AV204

All MX series

This application was written by Ray of LCD Studio. (Ray@lcdstudio.com)

Alphanumeric Software  Display Tuner407KiB

Description

This basic application allows you to test and set LCD Contrast, Brightness, VFD Brightness, set baudrate and send text to the display.

Compatible Displays:

All LK/VK/PK, MOS, MX and LCD/VFD series.

Alphanumeric Software  Custom Character Tool451.61KiB

Description

This simple program to give you hex values for custom characters.

This program allows you to see the hex values per lines for custom characters making implication easier. Simply download the program, uncompress and run. You will require Microsoft .NET Framework Version 1.1, it can be downloaded from here.


This application was written by Ray of LCD Studio. (Ray@lcdstudio.com)

For technical discussions and questions, please visit our forums

Alphanumeric Software  Boot Edit524.62KiB

Description

Boot Edit is designed for modification of advanced features of the LK/VK/PK USB and MX series. This is a more advanced version of the Boot Logo software.

Boot Edit allows the setting of these features:

  • Custom startup screen using custom characters
  • Power on GPO and FAN settings, such as speed, and frequency
  • LCD Contrast, backlight brightness and VFD brightness

Compatible Displays:

  • LK/VK/PK202-25
  • LK/VK/PK202-24-USB
  • LK/VK204-24-USB
  • MOS-AL/AV/AP202
  • MOS-AL/AV204
  • All MX series

Only the MX and USB series support the Edit GPO Defaults section.

This application was written by Ray of LCD Studio. (Ray@lcdstudio.com)

USB Drivers  32/64 Bit USB Drivers 2.12.282.12.281.61MiB

Description

USB Drivers for all USB displays, except the GX. Including LK/ELK/VK/PK/OK/GLK/EGLK/GLT/GTT/MOU/X-Board/MX/Eve Series.

32/64 Bit USB Drivers Version 2.12.28-1 For Windows 2000, XP, 2003, 2008, 2008R2, Vista, 7, 8, and 10

Notes

Based on 2.12.28 Drivers from FTDI.

Changelog

Added the following unit:

  • USB2SPI Bridge: 1B3D/0200

Application Notes

 File NameRevisionSize 
 File NameRevisionSize 
Linux  Linux Installation126.55KiB

Description

A detailed overview of Linux USB driver installation and methods for communicating to a Matrix Orbtal display with C in a Liunx environment.

Arduino Development  Arduino GTT (Rev2.0) Application Note572.04KiB

Description

A brief description of the hardware and software set-up used in this application to write text and commands, as well as read from a Matrix Orbital GTT display using I2C protocol.

Arduino Development  Arduino GTT (Rev2.0) Hello World1.39KiB

Description

A simple Hello World app for a Matrix Orbital GTT display introducing Arduino I2C libraries, text transmission, and commands. Required autoexec file is provided, please save it to the root folder of your GTT.

Arduino Development  Arduino GTT (Rev2.0) Coordinate Touch1.6KiB

Description

A more advanced drawing app for a Matrix Orbital GTT display introducing I2C reading, event parsing, and feedback commands. Required autoexec file is provided, please save it to the root folder of your GTT.

Arduino Development   Arduino Intelligent Series I2C Application Note624.61KiB

Description

A summary of functions used to set up a simple menu structure using the Matrix Orbital I2C protocol.

Arduino Development   Arduino Intelligent Series I2C Code2.02KiB

Description

A zipped version of the .ino file used for this demo.

C++ Development  Intelligent Series C++ AppNote292.83KiB

Description

A summary of functions used to send text and commands to as well as read from a Matrix Orbital display in C++.

C++ Development  Intelligent Series C++ Hello World6KiB

Description

A simple Hello World app for a Matrix Orbital display introducing serial port operations, text transmission, and commands.

C++ Development  Intelligent Series C++ Input/Output18.53MiB

Description

A slightly more complex I/O app for a Matrix Orbital display introducing reading and streamlining earlier concepts.

C Development  Alphanumeric C Library AppNote147.62KiB

Description

Instructions and details for the Alphanumeric C Library Demo.

C Development  Alphanumeric Library Demo Code9.52KiB

Description

Complete C language Demo Code for use with the LK162-4T and LK162-7T, as well as Library files for use with all Matrix Orbital Alphanumeric Displays

C Development  Alphanumeric Clock and DOW Temperature Appnote456.14KiB

Description

Instructions and details for the Alphanumeric Clock and DOW temperature Demo.

C Development  Alphanumeric Clock and DOW Temperature Demo Code13.96KiB

Description

An advanced application that incorporates a Dallas One-Wire temperature measurement, reading and writing of Customer Data, and taking basic information from your PC to be shown on your display.

BASIC Stamp  MOS BS Quick Install385.29KiB
Python Documentation  Python Intelligent Series AppNote376.43KiB

Description

A summary of functions used to send text and commands to as well as read from a Matrix Orbital display in Python.

Python Documentation  Python Matrix Orbital Intelligent Series Module675B

Description

A simple Python module implementing text, command, and read functions on a Matrix Orbital display.

Documents

 File NameRevisionSize 
 File NameRevisionSize 
OK202-25  PDF Drawing for OK202-25 Revision 3.2120.05KiB

Description

PDF style Drawing for the Standard OK202-25 Revision 3.2.

OK202-25  PDF Drawing for OK202-25-USB Revision 1.0118.34KiB

Description

PDF style Drawing for the OK202-25-USB Revision 1.0.

OK202-25  2D Drawing for OK202-25 Revision 3.21.41MiB

Description

DWG style Drawing for the Standard OK202-25 Revision 3.2.

OK202-25  2D Drawing for OK202-25-USB Revision 1.0894.69KiB

Description

DWG style Drawing for the OK202-25-USB Revision 1.0.

OK202-25  3D Drawing for OK202-25 Revision 3.220.87MiB

Description

Solidworks .step style 3D Drawing for the Standard OK202-25 PCB Revision 3.2.

OK202-25  3D Drawing for OK202-25-USB Revision 1.020.79MiB

Description

Solidworks .step style 3D Drawing for the OK202-25-USB PCB Revision 1.0.

OK202-25  Manual for OK202-25 2.36MiB

Description

Manual for the OK202-25: Standard model PCB 3.0 or higher, USB model PCB 1.0 or higher.

Available Options

  • PCB Rev: 3
  • Model: OK202-25
  • Availability: In Stock
  • $59.95USD
  • 25 or more $57.33USD
  • 50 or more $54.60USD
  • 100 or more $50.51USD
  • 200 or more $48.76USD
  • 500+ : Contact us

Tags: OK202-25