We are experiencing high volumes, online orders are 2-8 weeks lead time.

LK162B-7T

Serial RS232|TTL|USB|I2C LCD 16x2 HMI 1U 7 keypad 5V|12V
LK162B-7T

The LK162-7T is a 16x2 intelligent LCD display designed to fit into 1U form factors. Engineered to quickly and easily add an elegant graphic HMI to any application. Multiple communication protocols such as Serial RS232, TTL, I2C, and USB communication modes allow the LK162-7T LCD to be connected to a wide variety of host controllers.


Our Character LCD provides you with a cost-effective industrial HMI user interface solution for that great product/project you are developing. This LCD displays features optional on-board medium digits, bar graphs all with the convenience of a 7 key backlit tactile keypad will allow fast development for any application.

  • 16x2 Character LCD 1U HMI
  • Available Interfaces: Serial RS232, TTL, I2C, and USB
  • Two available voltage options: 5V, and 9-15 (12V) Wide Voltage
  • 7 key backlit tactile keypad
  • Piezo Buzzer to provide audio feedback
  • 3 dual colour indication status LEDs
  • 2 General Purpose Outputs
  • Software controlled contrast and brightness with configurable time-out setting up to 90 minutes
  • Built in Horizontal or Vertical bar graphs
  • Extended temperature available for extreme environments of -20C to 70C
  • Fast and easy development
  • Designed, supported and Made in CANADA
  • Long life cycle
  • Backed by Matrix Orbital's decades of research and development

Module
Family/SeriesIntelligent Display
Module Width (mm)125
Module Height (mm)35
Screen
Display TypeCharacter LCD
Backlight TypeLED
Viewing Area Width (mm)61
Viewing Area Height (mm)15.8
Active Area Width (mm)56.2
Active Area Height (mm)11.5
Resolution Width (Pixels)80
Resolution Height (Pixels)16
Pixel Pitch Width (mm)0.65
Pixel Pitch Height (mm)0.7
Pixel Width (mm)0.55
Pixel Height (mm)0.65
Character Columns16
Character Rows2
Character Pitch Width (mm)3.55
Character Pitch Height (mm)5.95
Character Width (mm)2.95
Character Height (mm)5.55
FontEuropean
Viewing DirectionTop
Viewing Angle60
HMI
TouchscreenNone
Keypad7
Haptic FeedbackNone
Audio FeedbackPiezo Buzzer
GPO's2
Advanced GPO'sNone
DOWNone
Integrated LED's3
Electrical
InterfaceRS232, TTL, I2C, USB
Command ProtocolMatrix Orbital
ControllerATMega164P
Negative VoltageIntegrated
Backlight DriverIntegrated
Minimum Voltage (Vdc)5
Typical Voltage (Vdc)5, 9-15
Maximum Voltage (Vdc)15
HeaderStandard
Environmental
Min. Operating Temp. (°C)0, -20
Max. Operating Temp. (°C)50, 70
Min. Storage Temp. (°C)-30, -10
Max. Storage Temp. (°C)60, 80

Downloads

 File NameRevisionSize 
 File NameRevisionSize 
Alphanumeric Software  DisplayTunerPro v1.0.0.0 Software1.0.0.0802.25KiB

Description

Display Tuner Pro (MOCD#) is an update to our popular uProject testing software for Matrix Orbital displays.  It adds support for new features and displays, including legacy and graphic units, to our established base of features and scripting.  This tool supports all Matrix Orbital Intelligent and Economy Series displays, including the following:

  • GLK Series (GLK12232-25-SM, GLK12232-25, GLK19264-7T-1U, GLK24064-25, GLK24064R-25-1U, GLK240128-25)
  • GLT Series (GLT12232-SM, GLT24064R-1U, GLT24064, GLT240128)
  • GOK Series (GOK12232A-25-SM, GOK12832-25-SM)
  • LCD/OLED/VFD Series (LCD0821, LCD2041, OLED0821, OLED2041, VFD2041)
  • LK Series (LK162-12, LK162A-4T, LK162B-7T, LK202-25, LK204-25, LK204-7T-1U, LK402-25, LK404-25)
  • MOI/MOS/MOU Series (MOS, MOU, XBoard-S, XBoard-U)
  • OK Series (OK162-12, OK202-25, OK204-25)
  • VK Series (VK162-12, VK202-25, VK204-25, VK246-25)
  • And all Legacy Displays

Alphanumeric Software  Boot Edit524.62KiB

Description

Boot Edit is designed for modification of advanced features of the LK/VK/PK USB and MX series. This is a more advanced version of the Boot Logo software.

Boot Edit allows the setting of these features:

  • Custom startup screen using custom characters
  • Power on GPO and FAN settings, such as speed, and frequency
  • LCD Contrast, backlight brightness and VFD brightness

Compatible Displays:

  • LK/VK/PK202-25
  • LK/VK/PK202-24-USB
  • LK/VK204-24-USB
  • MOS-AL/AV/AP202
  • MOS-AL/AV204
  • All MX series

Only the MX and USB series support the Edit GPO Defaults section.

This application was written by Ray of LCD Studio. (Ray@lcdstudio.com)

Alphanumeric Software  Display Tuner407KiB

Description

This basic application allows you to test and set LCD Contrast, Brightness, VFD Brightness, set baudrate and send text to the display.

Compatible Displays:

All LK/VK/PK, MOS, MX and LCD/VFD series.

Alphanumeric Software  Custom Character Tool451.61KiB

Description

This simple program to give you hex values for custom characters.

This program allows you to see the hex values per lines for custom characters making implication easier. Simply download the program, uncompress and run. You will require Microsoft .NET Framework Version 1.1, it can be downloaded from here.


This application was written by Ray of LCD Studio. (Ray@lcdstudio.com)

For technical discussions and questions, please visit our forums

Alphanumeric Software  Boot Logo40.03KiB

Description

Boot Logo is designed for modification of the startup screen for some alphanumeric displays with startup screens.

The user has the ability to use the normal text from the display\'s font table, and the 8 custom characters.

Compatible Displays:

LK/VK/PK162-12
LK/VK/PK202-25
LK/VK/PK202-24-USB
LK/VK204-24-USB

MOS-AL/AV/AP202
MOS-AL/AV204

All MX series

This application was written by Ray of LCD Studio. (Ray@lcdstudio.com)

Alphanumeric Software  uProject1.42MiB

Description

uProject is an advanced testing software for Matrix Orbital displays. It allows testing of nearly all the features and allows test scripting and many other advanced features.

uProject (micro Project) is a series of different tools that should allow the testing of nearly all the features of most of our displays. uProject also features

scripting abilities to speed up testing or changing of a specific feature, such as backlight brightness or contrast.

 

All LK/VK/PK, MOS, MX and LCD/VFD series.

Documents

 File NameRevisionSize 
 File NameRevisionSize 
LK162B-7T  3D Model for LK162B-7T R1.0.STEP9.68MiB

Description

3D Model .STEP for LK162B-7T PCB Revision 1.0.

LK162B-7T  PCN 2022-10-13-02206.26KiB

Description

PCB R1.0.1 Release

LK162B-7T  PCN 2016-01-21-02231.86KiB

Description

Firmware v7.3 Release

LK162B-7T  2D Drawing for LK162B-7T Revision 1.01.0372.21KiB

Description

DWG style Drawing for LK162B-7T PCB Revision 1.0.

LK162B-7T  PDF Drawing for LK162B-7T Revision 1.01.0101.56KiB

Description

PDF style Drawing for LK162B-7T PCB Revision 1.0.

LK162B-7T  Manual for LK162B-7T PCB Revision 1.01.02.14MiB

Description

Manual for PCB Revision 1.0.

Application Notes

 File NameRevisionSize 
 File NameRevisionSize 
Application Notes  eGTT50-TPR Drawing (Rev 1.0).pdf327.29KiB

Description

TPN: non touch, TPR: resistive touch, TPC: capacitive touch

Application Notes  Arduino EVE UNO Example Code-1B

Description

Written for an EVE2 or EVE3 or EVE4 running on an Arduino UNO.

Application Notes  ESP32 EVE Example Code-1B

Description

Example code for the EVE on a ESP with the WEMOS D1 mini. Most models of the ESP32/ESP8266 should work, but are untested.



Write a review

Please login or register to review

Options Required : Select one from each
Price may change based on options selected.

  • Model: LK162B-7T
  • Availability: In Stock (Build to Order)
  • $58.82USD
  • 50 or more $48.80USD
  • 100 or more $44.87USD
  • 200 or more $40.65USD
  • 500+ : Contact us

New PCB R1.0.1 Release

Please see the PCN 2022-10-13-02 for more details 

 

Tags: LK162B-7T, CFA633, CFA533