BLC2041
Double 5.25" Bay Serial RS232|TTL|USB|I2C|RS422 LCD 20x4 5V|12V
With the BLC2041 you will find all that you need for a PC Bay Insert. This part number includes your LCD display, bracket and cables.
Display:
LCD2041-V
• Wide Voltage efficient power regulator +9 to +15Vdc
• 20 Characters by 4 lines
• Serial (RS232/TTL/I2C/USB) LCD
Mounting Bracket:
B2041
Cables:
Power Cable
4ft serial cable
| Module | |
| Family/Series | PC Bay Insert |
| Module Width (mm) | 149 |
| Module Height (mm) | 85 |
| Screen | |
| Display Type | Character LCD |
| Backlight Type | LED |
| Viewing Area Width (mm) | 76 |
| Viewing Area Height (mm) | 25.2 |
| Active Area Width (mm) | 70.4 |
| Active Area Height (mm) | 20.8 |
| Resolution Width (Pixels) | 100 |
| Resolution Height (Pixels) | 32 |
| Pixel Pitch Width (mm) | 0.6 |
| Pixel Pitch Height (mm) | 0.6 |
| Pixel Width (mm) | 0.55 |
| Pixel Height (mm) | 0.55 |
| Character Columns | 20 |
| Character Rows | 4 |
| Character Pitch Width (mm) | 3.55 |
| Character Pitch Height (mm) | 5.35 |
| Character Width (mm) | 2.95 |
| Character Height (mm) | 4.75 |
| Font | Japanese, European |
| Viewing Direction | Top |
| Viewing Angle | 60 |
| HMI | |
| Touchscreen | None |
| Keys | 25 |
| Haptic Feedback | None |
| Audio Feedback | None |
| GPO's | 6 |
| Advanced GPO's | None |
| DOW | Optional, 1 |
| Integrated LED's | None |
| Overlay | Beige, Silver, Black |
| Electrical | |
| Interface | RS232, TTL, I2C, USB |
| Command Protocol | Matrix Orbital |
| Controller | ATMega8535 |
| Negative Voltage | Integrated |
| Backlight Driver | Integrated |
| Minimum Voltage (Vdc) | 9 |
| Typical Voltage (Vdc) | 9-15 |
| Maximum Voltage (Vdc) | 15 |
| Header | Standard |
| Environmental | |
| Max. Operating Temp. (°C) | 50 |
| Min. Storage Temp. (°C) | -20 |
| Max. Storage Temp. (°C) | 70 |
Application Notes | |||||||
|---|---|---|---|---|---|---|---|
| File Name | Revision | Size | |||||
| File Name | Revision | Size | |||||
| Application Notes |
 eGTT50-TPR Drawing (Rev 1.0).pdf | 327.29KiB | DescriptionTPN: non touch, TPR: resistive touch, TPC: capacitive touch | ||||
| Application Notes | Arduino EVE UNO Example Code | -1B | DescriptionWritten for an EVE2 or EVE3 or EVE4 running on an Arduino UNO. | ||||
| Application Notes | ESP32 EVE Example Code | -1B | DescriptionExample code for the EVE on a ESP with the WEMOS D1 mini. Most models of the ESP32/ESP8266 should work, but are untested. | ||||
Documents | |||||||
|---|---|---|---|---|---|---|---|
| File Name | Revision | Size | |||||
| File Name | Revision | Size | |||||
| LK202-25 |
Manual for PCB Revision 1.12 | 1.12 | 530.48KiB | DescriptionPCB Revision 1.12 | |||
| LK202-25 |
Manual for PCB Revision 1.40 to 1.50 | 1.4 | 476.77KiB | DescriptionPCB Revision 1.40 to 1.50 | |||
| LK202-25 |
Manual for PCB Revision 2.00 to 2.20 | 2.0 | 1.67MiB | DescriptionManual for PCB Revision 2.00 to 2.20 | |||
| LK202-25 |
 3D Drawing for LK202-25-USB Revision 1.0 | 1.0 | 6.35MiB | DescriptionSolidworks .step style 3D Drawing for the Standard LK202-25-USB PCB Revision 1.0. | |||
| LK202-25 |
3D Drawing for LK202-25 PCB Revision 3.0 | 3.0 | 6.24MiB | DescriptionSolidworks .step style 3D Drawing for the Standard LK202-25 PCB Revision 3.0. | |||
| LK202-25 |
 2D Drawing for LK202-25-USB Revision 1.0 | 1.0 | 112.37KiB | DescriptionDWG style Drawing for the LK202-25-USB Revision 1.0. | |||
| LK202-25 |
2D Drawing for LK202-25 Revision 3.0 | 3.0 | 113.52KiB | DescriptionDWG style Drawing for the Standard LK202-25 Revision 3.0. | |||
| LK202-25 |
PDF Drawing for LK202-25-USB Revision 1.0 | 1.0 | 97.09KiB | DescriptionPDF style Drawing for the LK202-25-USB Revision 3.0. | |||
| LK202-25 |
PDF Drawing for LK202-25 Revision 3.0 | 3.0 | 98.39KiB | DescriptionPDF style Drawing for the Standard LK202-25 Revision 3.0. | |||
| LK202-25 |
Manual for LK202-25 PCB Revision 3.0 | 3.0 | 2.12MiB | DescriptionManual for the LK202-25: Standard PCB Revision 3.0 or higher, USB PCB Revision 1.0 or higher. | |||