HTT50A
The HTT50A is a plug and play 5.0" HDMI TFT Display that features a full color 800 x 480 WVGA TFT display, automatic resolution detection and a 24bit DVI/HDMI interface. The resistive touch, capacitive touch, or non-touch modules are compatible with a wide range of systems including: Raspberry Pi, Windows, Linux and BeagleBone, iMX. From the hobbyist to the high volume industrial application, the HTT Series was designed to satisfy a wide range of customer application requirements.
Additional Features Include:
- 800 x 480 WVGA 5" HDMI TFT Display
- Upgradable touch driver firmware
- Automatic HDMI EDID
- USB Touchscreen
- Touch Digitizer
- Horizontal or Vertical headers for easy Panel Mounting
- 5V or 9-35V Industrial Power Input
- Operating Temp: -20 to +70C
- Low profile 3M mounting holes
- Semi-Custom designs available
Module | |
Family/Series | HTT |
Module Width (mm) | 121.2 |
Module Height (mm) | 92.25 |
Screen | |
Display Type | TFT - Color |
Backlight Type | LED |
Diagonal Screen Size (in) | 5 |
Active Area Width (mm) | 108 |
Active Area Height (mm) | 64.8 |
Resolution Width (Pixels) | 800 |
Resolution Height (Pixels) | 480 |
Pixel Pitch Width (mm) | 0.135 |
Pixel Pitch Height (mm) | 0.135 |
Font | Multilingual |
Viewing Direction | Bottom, Top |
Viewing Angle | 140 |
HMI | |
Touchscreen | None, Resistive, Capacitive |
Keypad | None |
Keys | None |
Haptic Feedback | None |
Audio Feedback | None |
GPO's | None |
Advanced GPO's | None |
DOW | None |
Integrated LED's | None |
Hardness | 3H (Res), 6H (Cap) |
Electrical | |
Interface | HDMI |
Command Protocol | HDMI |
Controller | TFP401A+LPC11U23 |
Backlight Driver | Integrated |
Minimum Voltage (Vdc) | 4.75 |
Typical Voltage (Vdc) | 5, 5-35 |
Maximum Voltage (Vdc) | 35 |
Header | Horizontal, Vertical |
Environmental | |
Min. Operating Temp. (°C) | -20 |
Max. Operating Temp. (°C) | 70 |
Min. Storage Temp. (°C) | -30 |
Max. Storage Temp. (°C) | 80 |
Documents |
|||||||
---|---|---|---|---|---|---|---|
File Name | Revision | Size |   | ||||
File Name | Revision | Size | |||||
HTT Series |
![]() |
1.2 | 1.03MiB | DescriptionThe Quick Start Guide for all of the HTT Series of Displays. |
|||
HTT50A |
![]() |
1.1 | 284.97KiB | DescriptionPDF style Drawing for HTT50A-TPR PCB Revision 1.0 with vertical headers. |
|||
HTT50A |
![]() |
1.1 | 280.03KiB | DescriptionPDF style Drawing for HTT50A Rev 1.0 PCB with vertical headers. |
|||
HTT50A |
![]() |
1.1 | 282.55KiB | DescriptionPDF style Drawing for HTT50A-TPC Rev 1.0 PCB with vertical headers. |
|||
HTT50A |
![]() |
1.1 | 305.62KiB | DescriptionPDF style Drawing for HTT50A-TPR Rev 1.0 PCB with horizontal headers. |
|||
HTT50A |
![]() |
1.1 | 277KiB | DescriptionPDF style Drawing for HTT50A Rev 1.0 PCB with horizontal headers. |
|||
HTT50A |
![]() |
1.1 | 306.55KiB | DescriptionPDF style Drawing for HTT50A-TPC Rev 1.0 PCB with horizontal headers. |
|||
HTT50A |
![]() |
1.1 | 1.26MiB | DescriptionHardware Manual for the HTT50A PCB Revision 1.1.1 and HTT50G PCB Revision 1.1.0. |
|||
HTT50A |
![]() |
1.1 | 8.45MiB | DescriptionA .step style 3D Model for the HTT50A-TPR-H6. |
|||
HTT50A |
![]() |
1.1 | 10.54MiB | DescriptionA .step style 3D Model for the HTT50A-TPR-H5. |
|||
HTT50A |
![]() |
1.1 | 7.98MiB | DescriptionA .step style 3D Model for the HTT50A-TPN-H6. |
|||
HTT50A |
![]() |
1.1 | 9.48MiB | DescriptionA .step style 3D Model for the HTT50A-TPN-H5. |
|||
HTT50A |
![]() |
1.1 | 8.49MiB | DescriptionA .step style 3D Model for the HTT50A-TPC-H6. |
|||
HTT50A |
![]() |
1.1 | 10.58MiB | DescriptionA .step style 3D Model for the HTT50A-TPC-H5. |
|||
HTT50A |
![]() |
1.1 | 9.44MiB | DescriptionA .dwg style Drawing for the Vertical Header (H6) and Resistive Touch (TPR) variant of the HTT50A. |
|||
HTT50A |
![]() |
1.1 | 9.8MiB | DescriptionA .dwg style Drawing for the Vertical Header (H6) and Capacitive Touch (TPC) variant of the HTT50A. |
|||
HTT50A |
![]() |
1.1 | 10.46MiB | DescriptionA .dwg style Drawing for the Horizontal Header (H5) and Resistive Touch (TPR) variant of the HTT50A. |
|||
HTT50A |
![]() |
1.1 | 10.17MiB | DescriptionA .dwg style Drawing for the Horizontal Header (H5) and Capacitive Touch (TPC) variant of the HTT50A. |
|||
HTT Series |
![]() |
1.0 | 1.01MiB | DescriptionGuide to using the HTT Utility program to control your HTT. Released on January 28, 2019 NotesCharacteristics such as touch orientation, sensitivity, and calibration can be adjusted through this program. This program is designed to run on Windows platforms, and tested on Windows 7 and 10. |
|||
HTT Series |
![]() |
1.0 | 1.01MiB | DescriptionGuide to using the HTT Utility program to control your HTT. Released on January 28, 2019 NotesCharacteristics such as touch orientation, sensitivity, and calibration can be adjusted through this program. This program is designed to run on Windows platforms, and tested on Windows 7 and 10. |
|||
HTT Series |
![]() |
1.0 | 907.31KiB | DescriptionGuide to installing the HTT multitouch/gesture recognition firmware on your HTT. Released on January 28, 2019 NotesOnce installed, the HTT touch panel will now be classified and recognized as a touch digitizer instead of an HID-compliant mouse. Operating systems will now use touch digitizer drivers, and use touch screen drivers on the display. This allows gestures such as one finger scroll, pinch to zoom, and swipes to be used on the HTT. |
|||
HTT Series |
![]() |
1.0 | 907.31KiB | DescriptionGuide to installing the HTT multitouch/gesture recognition firmware on your HTT. Released on January 28, 2019 NotesOnce installed, the HTT touch panel will now be classified and recognized as a touch digitizer instead of an HID-compliant mouse. Operating systems will now use touch digitizer drivers, and use touch screen drivers on the display. This allows gestures such as one finger scroll, pinch to zoom, and swipes to be used on the HTT. |
Downloads |
|||||||
---|---|---|---|---|---|---|---|
File Name | Revision | Size |   | ||||
File Name | Revision | Size | |||||
HTT Utility |
![]() |
1.0 | 52.82KiB | DescriptionSupported units: HTT50A-TPR, HTT50A-TPC, HTT50G-TPC, HTT70A-TPR, HTT70A-TPC, HTT70G-TPC. For use in Windows only. Released on January 8, 2019 NotesUtility to change the display touch orientation, save and load calibration files (for TPRs), and other future features. For use with new HTT muti-touch firmware >= R2.0.10589 |
|||
HTT Firmware |
![]() |
1.0 | 12.13KiB | DescriptionFirmware file for the HTT series. Supported units: HTT50A-TPR, HTT50A-TPC, HTT50G-TPC, HTT70A-TPR, HTT70A-TPC, HTT70G-TPC Released on January 8, 2019 NotesNew multi-touch firmware. |
|||
HTT Calibration Software |
![]() |
1.0 | 26.75KiB | DescriptionCalibration software for the HTTXX-TPR series. For use in Windows only. Released on January 8, 2019 NotesFor use with HTT with >= R2.0.10589 firmware |